Information about the direction and velocity of rotary tidal currents is found in the __________.?
A) Mariner’s Guide B) Tidal Current Tables C) Nautical Almanac D) Tide Tables E)NULL
Soru Kategorisi Güverte
Your vessel will be docking at Chester, PA, during the evening of 22 April 1983. The chart shows a depth of 20 feet (6.1 meters) at the pier. What will be the depth of water available at 2310 EST (ZD +5)?
A) 19.2 feet (5.9 meters) B) 20.8 feet (6.3 meters) C) 24.7 feet (7.5 meters) D) 25.8 feet (7.9 meters). E)NULL
The wind in the vicinity of Nantucket Shoals Light has been southerly at an average speed of 23 knots. The predicted set and drift of the rotary tidal current are 225° at 0.8 knot. What are the set and drift of the current you can expect at Nantucket Shoals Light?
A) 025° at 1.8 knots B) 218° at 1.1 knots C) 235° at 0.5 knot D) 247° at 0.7 knot E)NULL
In the United States, short-range radio navigational warnings are broadcast by the __________.?
A) Coast Guard B) Corps of Engineers C) NOAA D) harbor master of the nearest port E)NULL
You are approaching a light fitted with a RACON. The light may be identified on the radar by __________.?
A) a dashed line running from the center of the scope to the light B) an audible signal when the sweep crosses the light C) a circle appearing on the scope surrounding the light D) a coded signal appearing on…
In the U.S. Aids to Navigation System, red and green horizontally-banded buoys mark __________.?
A) channels for shallow draft vessels B) general anchorage areas C) fishing grounds D) junctions or bifurcations E)NULL
While the Pilot is embarked he or she __________.?
A) is solely responsible for the safe navigation of the vessel B) is a specialist hired for his or her local navigationalknowledge C) relieves the officer of the watch D) relieves the Master of his duties E)NULL
The primary purpose of the stud is to prevent the anchor chain from __________.?
A) kinking B) distorting C) elongating D) breaking E)NULL
A towing hook may be released from the __________.?
A) tug’s engineroom or the bow B) pilot house or aft steering station C) forecastle D) towing bitts by reaching over and releasing a lever E)NULL
While in drydock your vessel will be belt-gauged. This process involves __________.?
A) measuring the thickness of the tail shaft liner B) taking the vessel’s offsets to check for hull deformation C) testing and examining the anchor cables for defective links D) drilling or sonic-testing the hull to determine the plate thickness…