Before a tank is to be crude oil washed, the oxygen content in the tank must be measured at a position __________.?
A) immediately above the level of the oil B) at the top of the tank C) in the vent riser D) one meter from the deck E)NULL
A) immediately above the level of the oil B) at the top of the tank C) in the vent riser D) one meter from the deck E)NULL
A) Liverpool splice B) Locking long splice C) Long splice D) Short splice E)NULL
A) drift away from the dock B) lose headway without swinging C) swing its stern towards the dock D) swing its stern away from the dock E)NULL
A) any certificated tankerman B) the Master of the vessel C) the officer of the watch D) the person designated as “person in charge” E)NULL
A) the Great Lakes in their entirety B) the Mississippi River System C) U.S. waters out to three miles offshore D) the St. Lawrence River to Anticosti Island E)NULL
A) Lock the turbine rotor and slowly bleed in steam until operating temperature is reached B) Run the pump at high speed with the discharge valves closed C) Run the turbine at slow speed with the pump disconnected D) Shut…
A) safety officer B) Coast Guard Officer approving the bill C) owner D) Master E)NULL
A) Ventilate the tank to eliminate any electrostatically charged mist. B) Attach the water supply hose to the portable machine after the cleaning head is positioned inside the tank. C) Insure that the tanks are not stripped until the final…
A) Uninspected towing vessels B) Offshore supply vessels C) Cargo ships D) Tank vessels E)NULL
A) An excessive number of miles of towing service. B) Failing a tensile strength test that proved the towline was no longer appropriate for expected sea conditions. C) When heavy grease on the towline saturates the core of the wire…