One horsepower equals_____________?
A) 1000 watts B) 746 watts C) 100 watts D) 940 watts E)786 watts
Soru Kategorisi GASM Sınavı
Cruise ships are included in the category of ;?
A) Naval ships B) Cargo ships C) Service ships D) Passenger ships E)Fishing vessels
_______________ is not a valve type?
A) Relief valve B) Stop valve C) Throttling valve D) Check valve E)Return valve
The depth of a vessel involves several very important ________ dimesions such as freeboard draft draft marks load lines.?
A) Apeak B) Sheer C) Down D) Vertical E)Upright
The sequence of events in a cycle within 4 stroke diesel engine is: 1.The piston is forced down at BDC (Bottom Dead Center) exhaust valve opens 2.The piston is at the top of its stroke, TDC (Top Dead Center), inlet valve opens, fresh air is drawn 3.Pressure is high in the gases 4.Fuel is injected as the piston reaches TDC, to start the combustion 5.Inlet valve opens, fresh air is drawn as the piston moves down 6.At the bottom of the stroke BDC inlet valve closes and the air in cylinder is compressed as the piston rises?
A) 2-5-6-4-3-1 B) 2-5-6-4-1-3 C) 2-6-5-4-3-1 D) 5-2-4-6-3-1 E)5-2-6-4-1-3
A compound gauge is able to measure:?
A) The sum of two pressures B) Either pressure or vacuum C) The difference between two pressures D) Two different pressures simultaneously E)Two different temperatures simultaneously
A “manometer” measures:?
A) Air pressure B) Steam pressure C) Oil pressure D) Water pressure E)Oil temperature
In a diesel engine, accumulation of sludge in the cooling spaces for cylinder liners and covers will cause :?
A) Perfect lubrication B) Reduced heat conductivity C) Increased heat conductivity D) Destruction of lubricating oil film E)All the above
What statement is not true regarding air recievers?
A) The pressure of air is 20 – 30 bar. B) The reciever must store enough air for twelve engine starts. C) The pressure inside is controlled by a pressure gauge. D) The air recievers are self-cleaning devices. E)Drain valves…
Injectors for use with heavy fuel oil may be internally cooled by either water or light oil to _____?
A) Prevent heat corrosion to internal components B) Increase fuel delivery rate and economy C) Prevent preignition D) Avoid carbonization of the nozzle tips E)None of the above