A wire rope for a 10-ton boom on a vessel shows signs of excessive wear and must be replaced. What safety factor should be used when ordering a new wire?
A) 4 B) 5 C) 6 D) 7 E)NULL
A) 4 B) 5 C) 6 D) 7 E)NULL
A) at the hawsepipe B) about one-third of the vessel’s length from the bow C) about two-thirds of the vessel’s length from the bow D) near the stern E)NULL
A) Obey the Pilot B) Obey the Master C) Ask the Pilot for guidance D) Bring the rudder to midships E)NULL
A) not exceed bare steerageway during the transit B) take a strain as soon as you can to control the tow C) come up to speed very slowly and maintain a “safe speed” D) come up to speed quickly, then…
A) immediately above the level of the oil B) at the top of the tank C) in the vent riser D) one meter from the deck E)NULL
A) Liverpool splice B) Locking long splice C) Long splice D) Short splice E)NULL
A) drift away from the dock B) lose headway without swinging C) swing its stern towards the dock D) swing its stern away from the dock E)NULL
A) any certificated tankerman B) the Master of the vessel C) the officer of the watch D) the person designated as “person in charge” E)NULL
A) the Great Lakes in their entirety B) the Mississippi River System C) U.S. waters out to three miles offshore D) the St. Lawrence River to Anticosti Island E)NULL
A) Lock the turbine rotor and slowly bleed in steam until operating temperature is reached B) Run the pump at high speed with the discharge valves closed C) Run the turbine at slow speed with the pump disconnected D) Shut…